Máy lấy mẫu nước thải liên tục Model: 3700C Hãng sản xuất: Teledyne Isco – Mỹ

Máy lấy mẫu nước thải liên tục

Model: 3700C

Hãng sản xuất: Teledyne Isco – Mỹ

Xuất xứ: Mỹ

 

Tham khảo tại: http://www.isco.com/products/products3.asp?PL=201101040

1.      Tính năng kỹ thuật:

-          Quick-change bottle cartridge system

-          Exclusive LD90 Liquid Presence Detector and pump revolution counting system ensure accurate, repeatable sample volumes.

-          Basic and extended programming modes for:

• Uniform time intervals
• Non-uniform time intervals
• Stormwater runoff sampling
• Multiple bottle compositing
• Split sampling

-          Thick foam insulation (R-11) and 16-lb. ice capacity to preserve samples.

-          3700 Controller is housed in a NEMA 4X and 6 (IP67) environmentally sealed enclosure, and is fully interchangeable between portable and refrigerated samplers.

2.      Ứng dụng:

-          wastewater effluent

-          stormwater monitoring

-          CSO monitoring

-          permit compliance

-          pretreatment compliance

3.      Phụ kiện và lựa chọn thêm:

-          Sequential sampling bottle configuration - 24 x 500 ml wedge-shaped polyethylene

-          Composite sampling bottle configurations - 1 x 2.5 gal (9450 ml) polyethylene or glass; 1 x 2.0 gal (7500 ml) ProPak® single-use bag

-          Suction lines and strainers

-          Samplink® Software for retrieval of sampling logs

4.      Thông số kỹ thuật:

3700C Compact Portable Sampler
Size (Diam x Ht):	17 x 27 inches (45 x 70.5 cm)
Weight:	Dry, less battery - 25 lbs (11.3 kg)
Material:	ABS Plastic
Power required:	12 VDC
Pump
Intake purge:	Adjustable air purge before and after each sample.
Tubing life indicator:	Provides a warning to change pump tubing.
Pump tubing life:	Recommended 500,000 pump counts
Intake suction tubing:	Vinyl or Teflon®; 3/8 inch (1 cm) or 1/4 inch (0.6cm) ID; 3 to 99 feet (1 to 30 m) Length
Maximum lift:	26 ft. (7.9 m)
Repeatability:	±10 ml typical
Typical line velocity @ Head height:	2.5 ft./s @ 3 ft; 2.5 ft./s @ 10 ft; 1.9 ft./s @ 15 ft. (0.76 m/s @ 0.9 m; 0.76 m/s @ 3.1 m; 0.58 m/s @ 4.6 m)
Liquid presence detector:	Non-wetted, non-conductive sensor detects when liquid sample reaches the pump to automatically compensate for changes in head heights.
Controller
Weight:	11 lbs (5 kg)
Size (HxWxD):	10 x 12.5 x 10 inches (25 x 32 x 25 cm)
Operational temperature:	32° to 120°F (0° to 49°C)
Enclosure rating:	NEMA 4X, 6 IP67
Program memory:	Non-volatile ROM
Flow meter signal input:	5 to 15 volt DC pulse or 25 millisecond isolated contact closure.
Interface port:	8 pin connector; data output at 2400 baud in ASCII. RS-232 format with handshake.
Clock accuracy:	1 minute per month, typical, for real time clock
Software
Sample frequency:	1 minute to 99 hours 59 minutes, in 1 minute increments. Non-uniform times in minutes or clock times 1 to 9,999 flow pulses
Sample pacing:	Uniform time, non-uniform time, flow, flow paced/time switched, STORM (time and flow paced sampling during sample collection.) Flow pacing is controlled by external flow pulses.
Multiplexing:	Samples per bottle (1 to 50 with 1000 ml bottles; 1 to 17 with 350 ml bottles), bottles per sample (1 to 24), multiple bottle compositing.
Sample volumes:	Programmable from 10 to 9,990 ml in 1 ml increments
Sample retries:	If no sample is detected, up to 3 attempts; user selectable
Rinse cycles:	Automatic rinsing of suction line up to 3 rinses for each sample collection
Program storage:	3 sampling programs
Programming modes:	Basic, extended and STORM
Sampling stop/resume:	Up to 24 real time/date sample stop/resume commands.
Controller diagnostics:	Tests for RAM, ROM, pump display, and distributor